For Free Estimate Call Now : +954-372-1480
Three Simple Methods to Detect Leaks in the Refrigerant Line

The refrigerant is a chemical compound present in almost every air-conditioning system because the task of absorbing and releasing the heat is performed by this element of an air conditioner. In fact, it’s impossible for electric air conditioners to provide the desired indoor cooling without a sufficient refrigerant charge. So, it’s your responsibility to make sure that the refrigerant charge in your air conditioner never gets lower than the required level. This is because inadequate refrigerant levels might lead to unwanted air-conditioning malfunctions, leaving you with no option other than hiring AC repair Coral Springs specialists.

Describing in simple terms, the refrigerant is the key component of an air-conditioning system, and if your AC ever gets low on the refrigerant charge, then you must not make a delay in hiring AC repair Coral Springs services. This is because it requires special expertise and equipment to find and seal the leaks in the refrigerant line. But in case, if you think yourself capable of this, then the following information can help you discover three simple methods to detect leaks in the refrigerant line.

  1. The refrigerant might attract dust, and this will make it easier for you to locate the leaking spots. You simply need to look out for dirty spots on the refrigerant line, which are most probably the leaks, and they need to be sealed as soon as possible. Apart from that, oil strains on the refrigerant line are also because of the leaking refrigerant.
  2. Arguably the easiest method to detect leaks in the refrigerant line is bubble-soap method. In this method, you simply need to apply the soap solution to the refrigerant line, and there will be bubbles visible on the leaking spots. In case if you successfully find some leaks on it, seal them with duct-tape, or you may contact the professionals for this job.
  3. You may also conduct a dye test, in which you will need to send a colored fluorescent dye through the refrigerant lines so that the dye will immediately pour out from the leaking spots. It is advised to conduct a dye test only when you have the knowledge and tools to do so.

Free Service Call

Where to find us

Our Facebook likes